Milk glue, also known as white glue or PVA adhesive, is widely used for woodworking. Correct preparation and application help create a clean, durable bond.
Nội dung bài viết
Prepare the surfaces
Make sure the wood surfaces are clean, dry, smooth and free from dust, oil or loose fibers. Align the parts before applying the adhesive.
Apply the right amount
Spread a thin, even layer of adhesive over one or both surfaces according to the product instructions. Too much glue can extend drying time and cause uneven joints.
Assemble and press
Join the parts while the adhesive is still wet. Apply uniform pressure with clamps or a press and keep the joint fixed for the recommended time.
Allow full drying
Do not load, machine or sand the joint before it has dried and developed sufficient strength. Drying time depends on temperature, humidity, wood porosity and glue application.
Important precautions
Close the container after use, protect the product from freezing and follow the technical data sheet. Clean tools with water before the adhesive dries.
Choosing a suitable product
Select the adhesive according to the wood species, joint type, moisture exposure and required working speed. TECHBOND specialists can recommend a suitable PVA adhesive for your application.
Need advice on the right industrial adhesive?
Share your materials, application and production process. TECHBOND will help recommend a suitable solution.
Request a consultation
